Peugeot 308 2022-2024 electric tailgate lift kit TR5036

Electric tailgate kit for Peugeot 308 2022-2024: powered boot opening and closing

The TR5036 electric tailgate lift kit powers boot opening and closing on your Peugeot 308 2022-2024. Features include factory-key control, adjustable opening height with memory, anti-pinch protection and electrically assisted latching. Choose the base version or add the optional foot sensor in the dropdown.

TR5036 fitment and configuration

Listed vehicle: Peugeot 308. Model years: 2022-2024. Compare your Peugeot 308 with the application photographs. The body style, tailgate configuration and listed model-year range must match this reference.

Ways to operate the tailgate

Original vehicle key

The kit documentation specifies opening and closing with the original vehicle key or remote. This lets you operate the boot from outside without lifting the tailgate manually. Button sequences and connections must follow the installation instructions.

Tailgate button and cabin control

The system supports operation from the tailgate button and a cabin control where available and correctly connected. The supplier describes front and rear buttons in an original-size format. Position and finish depend on the application, so use the components intended for your vehicle.

Optional foot sensor

Select with foot sensor to operate the tailgate by moving your foot within the detection area under the rear of the vehicle. This option is useful when carrying bags or luggage. The accessory is optional and is included only with the selected sensor configuration. The version without the sensor retains key and button control.

Adjustable opening height with memory

Set the maximum opening height to suit your needs and save it with the height-memory function. The documentation also describes stopping movement at different heights. This helps adapt access to your preferred reach and available space above the boot. Configure the position according to the kit instructions.

Anti-pinch detection and audible warning

Anti-pinch protection detects resistance during movement and, as described by the manufacturer, reverses travel when an obstacle is encountered. An audible warning accompanies opening and closing to indicate tailgate movement. Check these functions after installation.

Electrically assisted latching and locking

The kit uses an electrically assisted closing mechanism, described by the supplier as suction closing. It acts during the final closing phase to draw in, cushion and secure the latch, reducing the need for a manual slam. The documentation also describes self-locking and a double-locking mechanism.

Original-style replacement latch

The supplier presents an upper replacement latch with a format equivalent to the original and describes latch replacement as part of installation. The design aims for an integrated finish and smooth closing. The supplier sheet describes replacing this latch without removing the tailgate decorative trim panel. Follow the exact reference instructions for positioning and electrical connection.

Declared construction and operating features

• Dual-actuator support for tailgate movement.
• Operation described as quiet and low consumption.
• Manufacturer-declared protection against water, dust, moisture and corrosion; no specific IP rating is stated in this material.
• Manufacturer-declared resistance to electromagnetic interference.
• Operating-temperature range shown in the source: -40° to 80°.
• The supplier declares a 100,000-cycle laboratory test; this is a test claim, not a guaranteed service life.

Installation and kit selection

This is a boot motorisation kit, rather than a complete replacement body panel. Professional installation is recommended for mounting the actuators and latch, connecting the controller and checking key operation, buttons, saved height and anti-pinch response. If selected, the foot sensor and its detection area must also be installed and checked.

Frequently asked questions

Do I need an additional remote?

The supplier page specifies control with the original vehicle key. The installer must complete the required connection and configuration.

Can I limit the opening height?

Yes. Maximum opening height adjustment and position memory are described.

Is the foot sensor included?

Only in the configuration selected with the sensor. The product price updates when the option changes.

TradeTec reference: TR5036. Send us the model, year and a photograph of the rear tailgate if you need help checking the application.

More kits for your vehicle brand

Peugeot electric tailgates · All electric tailgate kits

Other Peugeot applications

• 408 2023-2024 — TR5037