Volkswagen Caravelle y Multivan T6 2016-2024 electric tailgate lift kit TR5033
Electric tailgate lift kit for Volkswagen Caravelle and Multivan T6 2016-2024 with factory-key control, height memory, anti-pinch detection, audible warning and assisted latching. Choose with or without a foot sensor. TR5033.
Electric tailgate kit for Volkswagen Caravelle and Multivan T6 2016-2024: powered boot opening and closing
The TR5033 electric tailgate lift kit powers boot opening and closing on your Volkswagen Caravelle and Multivan T6 2016-2024. Features include factory-key control, adjustable opening height with memory, anti-pinch protection and electrically assisted latching. Choose the base version or add the optional foot sensor in the dropdown.
TR5033 fitment and configuration
Listed vehicle: Volkswagen Caravelle and Multivan T6. Model years: 2016-2024. Volkswagen Caravelle and Multivan T6 application with a single lift-up rear tailgate. Compare your vehicle with the application photograph before selecting the kit.
Ways to operate the tailgate
Original vehicle key
The kit documentation specifies opening and closing with the original vehicle key or remote. This lets you operate the boot from outside without lifting the tailgate manually. Button sequences and connections must follow the installation instructions.
Tailgate button and cabin control
The system supports operation from the tailgate button and a cabin control where available and correctly connected. The supplier describes front and rear buttons in an original-size format. Position and finish depend on the application, so use the components intended for your vehicle.
Optional foot sensor
Select with foot sensor to operate the tailgate by moving your foot within the detection area under the rear of the vehicle. This option is useful when carrying bags or luggage. The accessory is optional and is included only with the selected sensor configuration. The version without the sensor retains key and button control.
Adjustable opening height with memory
Set the maximum opening height to suit your needs and save it with the height-memory function. The documentation also describes stopping movement at different heights. This helps adapt access to your preferred reach and available space above the boot. Configure the position according to the kit instructions.
Anti-pinch detection and audible warning
Anti-pinch protection detects resistance during movement and, as described by the manufacturer, reverses travel when an obstacle is encountered. An audible warning accompanies opening and closing to indicate tailgate movement. Check these functions after installation.
Electrically assisted latching and locking
The kit uses an electrically assisted closing mechanism, described by the supplier as suction closing. It acts during the final closing phase to draw in, cushion and secure the latch, reducing the need for a manual slam. The documentation also describes self-locking and a double-locking mechanism.
Original-style replacement latch
The supplier presents an upper replacement latch with a format equivalent to the original and describes latch replacement as part of installation. The design aims for an integrated finish and smooth closing. The supplier sheet describes replacing this latch without removing the tailgate decorative trim panel. Follow the exact reference instructions for positioning and electrical connection.
Declared construction and operating features
- Dual-actuator support for tailgate movement.
- Operation described as quiet and low consumption.
- Manufacturer-declared protection against water, dust, moisture and corrosion; no specific IP rating is stated in this material.
- Manufacturer-declared resistance to electromagnetic interference.
- Operating-temperature range shown in the source: -40° to 80°.
- The supplier declares a 100,000-cycle laboratory test; this is a test claim, not a guaranteed service life.
Installation and kit selection
This is a boot motorisation kit, rather than a complete replacement body panel. Professional installation is recommended for mounting the actuators and latch, connecting the controller and checking key operation, buttons, saved height and anti-pinch response. If selected, the foot sensor and its detection area must also be installed and checked.
Frequently asked questions
Do I need an additional remote?
The supplier page specifies control with the original vehicle key. The installer must complete the required connection and configuration.
Can I limit the opening height?
Yes. Maximum opening height adjustment and position memory are described.
Is the foot sensor included?
Only in the configuration selected with the sensor. The product price updates when the option changes.
TradeTec reference: TR5033. Send us the model, year and a photograph of the rear tailgate if you need help checking the application.
More kits for your vehicle brand
Volkswagen electric tailgates · All electric tailgate kits
Other Volkswagen applications
Data sheet
- Compatible vehicle make
- Caravelle y Multivan T6
Caravelle y Multivan T6 (2016-2024)
Volkswagen
Related products
(There is 1 other product in the same category)
